MX TUNER 2.0
Standard with every new MY23 RM-Z250 purchased, the plug and play MX Tuner 2.0 allows users to alter the engine mapping via the intuitive smartphone WiGET app, available on iOS and Android devices.
The WiGET app comes with several pre-installed factory settings for easy tuning for different riding styles and track conditions. For the more experienced tuner, the possibilities are practically endless with the ability to create fully customised maps with specific settings for 36 points of ignition timing and 36 points of fuel injection delivery.
PREMIUM KYB SUSPENSION
The 49mm KYB coil spring fork replaces the previous model’s PSF2 air fork. Featuring a unique design that provides a progressive damping setup offering excellent compliance over small bumps while firming up deeper into the stroke to handle bigger hits such as harsh jump landings. Upper and lower triple clamp design has been optimised for rigidity while cutting 60 grams.
MORE POWERFUL ENGINE
Cylinder Head Design
Centre-port cylinder head design contributes to increased output and throttle response by approximately 5%.
Dual-Fuel Injectors
The fuel injection system now features two injectors. Instead of using a single injector that can compromise low-end fuelling in order to supply enough fuel for top-end power, the primary injector delivers precise low-rpm fuelling while a secondary injector at higher rpm provides the extra fuel needed.
Increased Fuel Pressure
Increased by 17% over the previous model and promotes the effective mixing of air and fuel, resulting in improved throttle response.
SUZUKI HOLESHOT ASSIST CONTROL (S-HAC)
All the power in the world won’t do any good if you can’t transfer it to the ground, and Suzuki’s innovative electronics work transparently with the rider for maximum acceleration on any type of dirt or track conditions. Suzuki’s third-generation traction management system, with a significantly updated S-HAC (Suzuki Holeshot Assist Control) system and more powerful ECM (engine control module).
Suzuki’s RM-Z250 goes another step further with the fourth-generation system featuring updated ECU software. The RM-Z250’s S-HAC system monitors throttle position and gear position in order to adjust ignition timing for maximum acceleration through the three critical stages of a motocross start: releasing the clutch, getting drive over the starting gate, and then powering down the start straight.
Three settings are available
A-mode: intended for hardpack surfaces where controlling wheelspin is paramount.
B-mode: for normal dirt conditions with good traction.
OFF: For normal unassisted take-offs.
Ergonomics
Renthal Fatbar Handlebars
Fitted as standard equipment , the top-shelf Renthal aluminium Fatbar offers more strength and less vibration than standard size aluminium handlebars.
Front Brake
270mm Solid Wave Rotor
The front brake disc diameter has been increased from 250mm on the previous generation to 270mm and the brake pad material has been optimised for more linear response characteristics as you brake harder.
Electronics
Rich & Lean Couplers
Riders can adjust the engine performance to suit varied track conditions, by plugging in either of two additional fuel-setting couplers to make the most of any riding conditions. Riders can also overwrite these plugs with new maps using the MX Tuner 2.0.
Fuel Tank
6.3L
Material changed from aluminium to resin, saving 312g.
ENGINE
DISPLACEMENT: 249cc
ENGINE: Single cylinder, liquid-cooled, DOHC
TRANSMISSION: 5-speed, constant mesh
STARTER: Primary Kick
SUSPENSION
FRONT SUSPENSION: 48mm KYB dual-chamber inverted spring fork, adjustable compression and rebound damping
REAR SUSPENSION: Link type, KYB shock with adjustable high and low compression and rebound damping and spring preload
BRAKES
FRONT BRAKES: Nissin twin-piston caliper, 270mm wave disc
REAR BRAKES: Nissin single-piston caliper, 240mm wave disc
SPECIFICATIONS/CAPACITIES
LENGTH: 2185mm
WIDTH: 835mm
HEIGHT: 1255mm
WHEELBASE: 1485mm
SEAT HEIGHT: 955mm
FUEL CAPACITY: 6.3L
WET WEIGHT: 106Kg
Reviews
There are no reviews yet.